self-propelled aerial work platform

1.hydraulic drive 2. travel swith control up and down to other floors . 3.manual pump in case power is cut off

        Product introduction :   

    1.  SJY series self-propelled lift  platform is two-phase  of  thress-phase . the control has two ways:manual and electric .

   2.The control button is put on the ground pane but they can be changed onto the platform or controlled by remote controller .

   3. At the moment ,  manual pump is equipped for the use in case power is cut off .  

   4.  It is convenient and flexibility to aerial work . Mainly used for factory maintaining or lamp installation , fixing or house decorating  or other aerial work .

            Elevator configuration:

    Lifting height : 4m , 6m , 8m , 10m , 12m ,14 m ,16m .

    load weight : 300kg , 500kg , 800kg , 1000kg

    Installation guide: Installation guide fixed

   Table-board Material: With 3mm pattern steel plate.

  The Pumping Station: anshan pumping station (Made in Liaoning Anshan Pumping Station)

   Oil Tank: high precision wearable hydraulic oil tank with double seals

  Hydraulic Pipe: high pressure pipe with double expanded metal inside.

   Hydraulic Oil:  DTE 32 Hydraulic

  power driven : the usual power supply is connection variety of 220v ,240v , 380v

  supporting power: 1.5kw , 2.2kw , 3kw , 4kw

             more  product  picture:

        

                

     As an professional manufacture, we can make it according to buyer's inquirements . Our company aim to "People is first , consumer is highest , quality is first " principle , we can provide best pice and quality . Relying on four basic parameter ( lift height , load weight , table size , power )

          

self-propelled aerial work platform